supply of various electrical materials and accessories required for electrical, maintenance and electrification works in various municipal properties in south zone-b (kanakpur), smc. - 4 ft. (1200 mm) tube fitting including 36/40 watt electronic ballast, without tube rod only fixture, 4 ft. (1200 mm) tube light rod, light output 2450 lumens., 4 ft. 18/20 watt led complete pvc t5 tube light lumen output, 2000/2100, luminary efficiency 100lm/watt, 2 ft. 08/10 watt t5 led complete pvc tube light lumen output 800/1000,, 4 ft. 18/20 watt led complete aluminum body t5 tube light lumen, output 2000/2100, luminary efficiency 100lm/watt, 2 ft. 08/10 watt t5 led complete aluminum body tube light lumen, output 800/1000,, 4 ft. (1200 mm) tube fitting without led tube rod only fixture with rotating, type side holder, 4 ft. led t5 tube light rod, glass type 18/20 watt lumen out 2100, 1200 mm, luminary efficiacy 100lm/watt, 36 watt electronic ballast (choke), tube light side holder simple, led tube light side holder (rotating type ), 40w tungsten filament lamp, 60w tungsten filament lamp, 100w tungsten filament lamp, 7 w led lamp, 9 w led lamp, 12 w led lamp, 2.0 x 2.0 feet square 36/40 (watt) led fixture for indoor lighting or its, equivalent, 2.0 x 2.0 feet square 36/40 (watt) led fixture driver for indoor lighting or its, equivalent, 18/20 watt, led panel light (square/round), 1700 lumens, 20/24 led panel light size 1 x 1 inch, 12/15w led panel light (square/round), 1020 lumens, 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to, 5700k, 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to, 5700k, 120 watt led flood light fitting having efficacy 100 lm/watt, cct 5000 k to 5700k, led strip light minimum 4.8 watt, 120 led per meter without driver, led strip light minimum 7.2 watt, 240 led per meter without driver, led strip light non integral suitable driver, 2 amp driver, 3 amp driver, 5 amp driver, 8 amp driver, 12.5 amp driver, 16 amp driver, 20 amp driver, supply of 1200 mm sweep (48''),bee 5 star rated, ceiling fan with brush less, direct current (bldc)permanent territe magnet motor, class of insulation: b,, rust free 3 nos. aluminum blades,2 nos, canopies , shackle kit with earthing, provision, 22 guage copper winding, power factor not < 0.9, service value, (cmm/w) minimum 6.85, air delivery minimum 215 cmm, 305 rpm, ceiling fan,(48''),1200 mm, energy efficient ,bee 1 star rated, high speed air, delivery ,minimum 218 cmm input power maximum 53 w, pedestal fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillanting ,type and, adjustable ,height complete with guard regulator, & standard lead fleixble wires, and plug top 110 watt., supplying & erecting single phase industrial pedestal fan suitable for medium, duty ring mounted low noise operation suitable for medium duty having 450, mm dia size and maximum speed 1440 rpm 0.80 a,80 watt., wall fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillating ,type and adjustable, ,height complete with guard regulator, & standard lead flexible wires and plug, top, wall fan a.c. 230 v. 50 cy/s. 450 mm sweep oscillating ,type and adjustable, ,height complete with guard regulator, & standard lead flexible wires and plug, top, supplying & erecting single phase approved make industrial wall fan suitable, for medium duty ring mounted low noise operation suitable for medium duty, having 600 mm dia size and maximum speed 1440 rpm 0.80 a,180 watt., supplying & erecting single phase approved make industrial exhaust fan, suitable for medium duty ring mounted low noise operation suitable for, medium duty having 300 mm dia size and maximum speed 1350 rpm, supplying & erecting single phase apporved make industrial exhaust fan, suitable for medium duty ring mounted low noise operation suitable for, medium duty having 225 mm dia size and maximum speed 1370 rpm, supplying & erecting approved make low noise decorative exhaust fan having, square frame abs body with inbuilt lowers & square frame, having 150 mm, with 1350 rpm, supplying & erecting approved make low noise decorative exhaust fan, having square frame abs body with inbuilt lowers & square frame, having 200, mm with 1350 rpm, supplying & erecting approved make low noise decorative exhaust fan, having square frame abs body with inbuilt lowers & square frame, having 250, mm with 1310 rpm, capacitor 440 v ac,1.5 uf, capacitor 440 v ac,2.5 uf (oiled filled), capacitor 440 v ac,10 uf, capacitor 440 v ac,25 uf, capacitor 440 v ac,36 uf, capacitor 440 v ac,45 uf, capacitor 440 v ac,50 uf, capacitor 440 v ac,100/120 uf, 1.5 ft celling fan ms pipe, 2 ft celling fan ms pipe, 2.5 ft celling fan ms pipe, 3 ft celling fan ms pipe, 4 ft celling fan ms pipe, ding dong bell, remote operated ding dong bell, buzzer, musical bell, parrot bell, 1/2 mcb box pvc enclosure, 3/4 mcb box pvc enclosure, mcb metal enclousre for double pole, mcb metal enclousre for four pole, 1 amp. single pole (sp) mcb, 6 amp. single pole (sp) mcb, 10 amp. single pole (sp) mcb, 16 amp. single pole (sp) mcb, 20 amp. single pole (sp) mcb, 32 amp. single pole (sp) mcb, 6 amp. double pole (dp) mcb, 10 amp. double pole (dp) mcb, 16 amp. double pole (dp) mcb, 25 amp. double pole (dp) mcb, 32 amp. double pole (dp) mcb, 40 amp. double pole (dp) mcb, 20 amp. four pole (fp) mcb, 32 amp. four pole (fp) mcb, 40 amp. four pole (fp) mcb, 63 amp. four pole (fp) mcb, 20 amp. three pole (tp) mcb, 32 amp. three pole (tp) mcb, 40 amp. three pole (tp) mcb, 63 amp. three pole (tp) mcb, 6 amp. single pole (sp) mcb, 10 amp. single pole (sp) mcb, 16 amp. single pole (sp) mcb, 32 amp. single pole (sp) mcb, 6 amp. double pole (dp) mcb, 10 amp. double pole (dp) mcb, 16 amp. double pole (dp) mcb, 25 amp. double pole (dp) mcb, 32 amp. double pole (dp) mcb, 40 amp. double pole (dp) mcb, 16 amp. four pole (fp) mcb, 25 amp. four pole (fp) mcb, 32 amp. four pole (fp) mcb, 40 amp. four pole (fp) mcb, 63 amp. four pole (fp) mcb, 63 amp. four pole (fp) mccb, 100 amp. four pole (fp) mccb, 125 amp. four pole (fp) mccb, 25 amp. double pole (dp) rccb 30ma sensitivity, 25 amp. double pole (dp) rccb 100 ma sensitivity, 40 amp. double pole (dp) rccb 30ma sensitivity, 40 amp. double pole (dp) rccb 100 ma sensitivity, 63 amp. double pole (dp) rccb 30ma sensitivity, 63 amp. double pole (dp) rccb 100 ma sensitivity, 100 amp. double pole (dp) rccb 30ma sensitivity, 100 amp. double pole (dp) rccb 100 ma sensitivity, 25 amp. four pole (fp) rccb 30 ma sensitivity, 25 amp. four pole (fp) rccb 100 ma sensitivity, 40 amp. four pole (fp) rccb 30 ma sensitivity, 40 amp. four pole (fp) rccb 100 ma sensitivity, 63 amp. four pole (fp) rccb 30 ma sensitivity, 63 amp. four pole (fp) rccb 100 ma sensitivity, 100 amp. four pole (fp) rccb 30 ma sensitivity, 100 amp. four pole (fp) rccb 100 ma sensitivity, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 4 way single door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 4 way double door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 6 way single door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 6 way double door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 8 way single door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 8 way double door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 12 way single door, sheet steel powder coated mcb distribution board-flush/ surface mounted, single phase 12 way double door, sheet steel powder coated mcb db board-flush/surface mounted 3 phase 4 way, ss double door ppi type for 1 phase outgoing horizontal box, sheet steel powder coated mcb db board-flush/ surface mounted 3 phase 8 way, ss double door ppi type for 1 phase outgoing horizontal box, 2-up pvc modular board surface, 3-up pvc modular board surface, 4-up pvc modular board surface, 6-up pvc modular board surface, 8-up pvc modular board surface, 12-up pvc modular board surface, 16-up pvc modular board surface, 18-up pvc modular board surface, 2-up modular plate, 3-up modular plate, 4-up modular plate, 6-up modular plate, 8-up modular plate, 12-up modular plate, 16-up modular plate, 18-up modular plate, dummy plate modular, indicator modular, modular switch 6 amp, modular switch 16 amp, modular plug 6 amp, modular plug 16 amp, modular bell push switch, plug type step type hum free regulator for modular, switch type step type hum free regulator for modular, 2 way switch modular, 6 to 32 amp s.p. mcb modular, 6 to 32 amp d.p. mcb modular, modular angle holder, modular battan holder, ac starter modular 16/25 a, two pin/rj-11 telephone socket for one gang, tv co-axial socket out, tissino type switch 6 amp (simple), tissino type switch 16 amp (simple), tissino type 2-way switch 6 amp, tissino type bell push, tissino type plug 6 amp (simple) 2 in 1 socket, tissino type plug 16 amp (simple), holder adapter, electronic hum free eme socket type step fan regulator (plug type), electronic hum free eme switch type step fan regulator, one no single pole 16 a switch & one no 6/16 a universal socket combined ( s, s combine with box), angle holder, batten holder, pendent holder, bakelite celling rose, 6 to 32 amp s.p. mcb, 6 to 32 amp d.p. mcb, 3 pin top 6a, 3 pin top 16a, 5 amp connector strip, 10 amp connector strip, male female 2 pin connector, 20 mm medium class rigid pvc pipes (3 mtr.), 25 mm medium class rigid pvc pipes (3 mtr.), saddle base with screw suitable for 20 mm rigid pvc pipes, saddle base with screw suitable for 25 mm rigid pvc pipes, junction 1 way 20/25/32 mm, junction 2 way 20/25/32 mm, junction 3 way 20/25/32 mm, junction 4 way 20/25/32 mm, coupling 20/25/32 mm, elbow 20/25/32 mm, tee 20/25/32 mm, pvc casing capping double lock type 12/20 mm (2 mtr.), pvc casing capping double lock type 12/25 mm (2 mtr.), pvc casing capping double lock type 12/32 mm (2 mtr.), upvc cable trunking system size 50 mm x 50 mm trunking (2 mtr.), external coupler 20/25/32 mm, internal coupler 20/25/32 mm, elbow 20/25/32 mm, tee 3/4 way 20/25/32 mm, inner/outer 20/25/32 mm, junction 1 way 20/25/32 mm, junction 2 way 20/25/32 mm, junction 3 way 20/25/32 mm, junction 4 way 20/25/32 mm, coupler 20/25/32 mm, cable tie, 300 mm (100 nos.), cable tie, 250 mm (100 nos.), cable tie, 200 mm (100 nos.), cable tie, 150 mm (100 nos.), cable tie,100 mm (100 nos.), 4 mm cable pvc clips (saddle) (100 nos.), 6 mm cable pvc clips (saddle) (100 nos.), 8 mm cable pvc clips (saddle) (100 nos.), 9 mm cable pvc clips (saddle) (100 nos.), 10 mm cable pvc clips (saddle) (100 nos.), 12 mm cable pvc clips (saddle) (100 nos.), 20 mm cable pvc clips (saddle) (100 nos.), 25 mm cable pvc clips (saddle) (100 nos.), khili for wiring (1'') (2.5 kg box) (doba khili), khili for wiring (1.5'') (2.5 kg box) (doba khili), metal screw 13 x 6 mm (1000 nos.), metal screw 19 x 6 mm (1000 nos.), metal screw 25 x 6 mm (1000 nos.), metal screw 36 x 6 mm (500 nos.), metal screw 45 x 6 mm (500 nos.), metal screw 50 x 6 mm (500 nos.), metal screw 35 x 8 mm (500 nos.), black metal screw 13 x 6 mm (1000 nos.), black metal screw 19 x 6 mm (1000 nos.), black metal screw 32 x 6 mm (1000 nos.), black metal screw 38 x 6 mm (750 nos.), black metal screw 50 x 6 mm (500 nos.), black metal screw 60 x 6 mm (400 nos.), black metal screw 75 x 6 mm (300 nos.), machine metal screw 5 x 16 mm nut-bolt with washer (5 kg.), electrical insulation tape roll length of 6 meter each with different colour, (r-y-b-n), wooden grip packet (50nos), pvc grip packet, aluminum strip (10 ft.long), rubber clamp (fan), pencil cell aaa size 1.5 v, pencil cell aa size 1.5 v, long lasting high power 1.5 v pencil cell aa1 size equivalent to panasonic, evolta or its equivalent, 9v battery cell, 12 v 23 a alkaline battery cell, aluminum lug pin type as per above wire/cable size 2.5/4 sq. mm cable, aluminums lug pin type as per above wire/cable size 6/10 sq. mm cable, aluminum lug pin type as per above wire/cable size 16 sq. mm cable, copper lug pin type for 2.5/4 sq. mm cable, copper lug pin type for 6/10 sq. mm cable, copper lug pin type for 16 sq. mm cable, aluminum lug ring type as per above wire/cable size 2.5/4 sq. mm cable, aluminums lug ring type as per above wire/cable size 6/10 sq. mm cable, aluminum lug ring type as per above wire/cable size 16 sq. mm cable, copper lug ring type for 2.5/4 sq. mm cable, copper lug ring type for 6/10 sq. mm cable, copper lug ring type for 16 sq. mm cable, 6 x 6 pvc pwd cutting board with plate, 6 x 8 pvc pwd cutting board with plate, 8 x 10 pvc pwd cutting board with plate, 10 x 12 wooden board with plate, 1 way pvc gang box, 2 way pvc gang box, 3 way pvc gang box, 4 way pvc gang box, 6 way pvc gang box, 63 a hrc fuse din type fuse, 100 a hrc fuse din type fuse, 125 a hrc fuse din type fuse, 160 a hrc fuse din type fuse, 200 a hrc fuse din type fuse, 250 a hrc fuse din type fuse, 400 a hrc fuse din type fuse, 500 a hrc fuse din type fuse, 630 a hrc fuse din type fuse, 63 a 415v mem copper fuse, 100 a 415v mem copper fuse, 200 a 415v mem copper fuse, 500 a 415v mem copper fuse, 63 a 415v mem copper fuse with lugs patt, 100 a 415v mem copper fuse with lugs patt, 200 a 415v mem copper fuse with lugs patt, 500 a 415v mem copper fuse with lugs patt, 200 a bolted type hrc copper fuse, 500 a bolted type hrc copper fuse, 10w led bulkhead fitting, 1w led torch, 3w led torch, 16 mm pvc corrugated flexible conduit pipe, 20 mm pvc corrugated flexible conduit pipe, 25 mm pvc corrugated flexible conduit pipe, 32 mm pvc corrugated flexible conduit pipe, l slotted type angel rail thickness 1.6 mm, length of 8 foot 3 inch, z type clamp length 175 mm x width 25 mm x thickness 4 mm, 1.0 sq. mm isi marked 1.1 kv grade fr pvc insulated (90 mtr), 1.5 sq. mm isi marked 1.1 kv grade fr pvc insulated (90 mtr), 2.5 sq. mm isi marked 1.1 kv grade fr pvc insulated (90 mtr), 4.0 sq. mm isi marked 1.1 kv grade fr pvc insulated (90 mtr), 6.0 sq. mm isi marked 1.1 kv grade fr pvc insulated (90 mtr), 1.0 sq. mm isi marked 1.1 kv grade frls pvc insulated (90 mtr), 1.5 sq. mm isi marked 1.1 kv grade frls pvc insulated (90 mtr), 2.5 sq. mm isi marked 1.1 kv grade frls pvc insulated (90 mtr), 4.0 sq. mm isi marked 1.1 kv grade frls pvc insulated (90 mtr), 32/20 mm twins twisted flexible copper wire (r&bk) (90 mtr), 2.5 sq. mm 2 core alluminum flat cable (90 mtr.), 4 sq. mm 2 core alluminum flat cable (90 mtr), 1.00 sq mm 2 core round flexible pvc insulated multi (100 mtr.), 1.00 sq mm 3 core round flexible pvc insulated multi (100 mtr.), 1.50 sq mm 3 core round flexible pvc insulated multi (100 mtr.), 2.50 sq mm 3 core round flexible pvc insulated multi (100 mtr.), 4.00 sq mm 3 core round flexible pvc insulated multi (100 mtr.), 2.50 sq mm 4 core round flexible pvc insulated multi (100 mtr.), 4.00 sq mm 4 core round flexible pvc insulated multi (100 mtr.), cat-6 utp cable (305 mtr.), telephone instrument, wires, un armoured cable, switch and accessories, elcb/mcb/distribution board, tube lights, lamp, led lamps, led tubes, ceilling fan, pedestal fan/wall, fan, exhaust fan, bldc fan, pvc pipe/casing capping, insulating pvc tape.
The tender document is a Request for Proposal (RFP) for selecting a bidder for the Design build finance operate and transfer of cement grinding units. It outlines the terms and conditions for a long-term agreement to construct and operate a cement grinding unit on a Design, Build, Finance, Operate, and Transfer (DBFOT) basis.
Agreement Duration : The agreement is valid for 30 years from the Scheduled Commercial Operation Date (SCOD).
Grant of Concession : The Owner grants the Concessionaire the right to access the project land and perform the scope of work.
Scope of Work : Includes designing, financing, construction, commissioning, stabilization, manufacturing of cement, operation and maintenance of project assets, and packaging and delivery of cement.
Raw Materials and Utilities : The Owner is responsible for providing raw materials and electricity.
Obligations of Concessionaire : Compliance with all applicable laws, maintaining safety standards, and ensuring the project assets meet performance parameters.
Commissioning and Stabilization : Detailed timelines and conditions for commissioning and stabilizing the grinding unit.
Conversion Charges : Payment terms for the conversion charges based on the lowest cost bid accepted by the Owner.
Liquidated Damages : Provisions for delay liquidated damages and shortfall liquidated damages.
Termination : Conditions under which the agreement can be terminated by either party and the consequences of termination.
Dispute Resolution : Any disputes arising under the agreement shall be resolved through arbitration.
Specifications and Standards : As per Ambuja standards
Annual Contracted Quantity of Cement
KPIs of Cement : Key KPIs of cement to be maintained
This document provides a comprehensive framework for the Concessionaire to develop and operate the cement grinding unit, ensuring compliance with all legal, technical, and operational requirements.
Eligibility Criteria - Download